Supermicro SuperServer SYS-121H-TNR - Page 72

72
Chapter 4: Motherboard Connections
BMC and PCH I²C/SDA to VRM/BMC and PCH I²C/SCl to VRM Select Jumper

. 

BMC and PCH I²C/SDA to VRM and BMC and PCH I²C/SCL to VRM Select Jumper
Jumper Settings
Jumper Setting Denition
 Default)
 
UID LED and BMC_Reset Button Select Jumper





CPLD JTAG Enable Jumper


CPLD JTAG Enable Jumper
Jumper Settings
Jumper Setting Denition
  (Default)
 
Front UID Switch/Reset Button Select Jumper (JRU1)
Jumper Settings
State Description
 (Default)
 