Preface
This manual is written for system integrators, PC technicians, IT professionals, and
knowledgeable end users. It provides information for the installation and use of the
X10DAL-i motherboard.
About This Motherboard
The Super X10DAL-i motherboard supports dual Intel E5-2600v3 Series proces-
sors (Socket R3) that offer Intel Microarchitecture 22nm Processing Technology,
delivering performance, power efciency, and feature sets optimized for small-form
factor workstation platforms. With the PCH C612 built in, the X10DAL-i motherboard
supports Intel® Node Manager 3.0, Intel® Management Engine, Intel® Thunderbolt
Technology, and 2133 MHz DDR4 memory. This motherboard is ideal for worksta-
tions used for medical imaging applications. Please refer to our website (http://www.
supermicro.com) for CPU and memory support updates.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board. It also provides detailed information about the Intel C612 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules, and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS setup utility.
Appendix A provides BIOS error beep codes.
Appendix B lists software installation instructions.
Appendix C details UEFI BIOS recovery instructions.
Preface
iii
To Next Page
Loading...
