EasyManua.ls Logo

Supermicro X10DAL-i - I2 C Bus to PCI-Exp. Slots, Manufacturer Mode Select

Supermicro X10DAL-i
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-34
X10DAL-i Motherboard User's Manual
A
B
Manufacturer Mode Select
Close this jumper (JPME2) to bypass
SPI ash security and force the system
to use the Manufacturer mode which
will allow the user to ash the system
rmware from a host server to modify
system settings. See the table on the
right for jumper settings.
ME Mode Select
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacture Mode
I
2
C Bus to PCI-Exp. Slots
Use Jumpers JI
2
C1 and JI
2
C2 to con-
nect the System Management Bus (I
2
C)
to PCI-Express slots to improve PCI
performance. These two jumpers are
to be set at the same time. The default
setting is on pins 2/3 to disable the con-
nections. See the table on the right for
jumper settings.
I
2
C for PCI-E slots
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled
Pins 2-3 Disabled (Default)
A. JI
2
C1
B. JI
2
C2
C. JPME2
C

Table of Contents

Related product manuals