Supermicro X13SCL-IF - Page 90

Super X13SCL-IF User's Manual
90
Note 2: For more information on TPM, refer to the TPM manual at http://www.super-
micro.com/manuals/other/TPM.pdf.
HTTP Boot Conguration
HTTP Boot Conguration
HTTP Boot Policy
Use this feature to select the policy of HTTP Boot. The options are Apply to all LANs, Apply
to each LAN, and Boot Priority #1 instantly.
Note: To congure each LAN port, select Apply to each LAN or Boot Priority #1 instantly.
Only "Instance of Priority 1" appears when selecting the option of Apply to all LANs.
HTTP Boot Checks Hostname
Selects whether HTTPS Boot Checks Hostname of TLS certicates matches the hostname
provided by the remote server. The options are Enabled and Disabled (WARNING: Security
Risk!!).
Warning: Disabling this option is a violation of RFC 6125 and may expose you to
Man-in-the-Middle Attacks. Supermicro is not responsible for any and all security risks
incurred by you disabling this option.
Priority of HTTP Boot
Instance of Priority 1
Use this feature to rank the targeted port.
Note: "Instance of Priority 2" is available for conguring when "HTTP Boot Policy" is
set to "Apply to each LAN" or "Boot Priority #1 instantly."
Note: The features below will be hidden if the Instance of Priority 1 and Instance of
Priority 2 are set to 0.
Select IPv4 or IPv6
Use this feature to select the Targeted LAN port that is boot from IPv4 or IPv6. The options
are IPv4 and IPv6.
Boot Description
Use this feature to input the HTTP boot option description, otherwise the boot option for the
URI will not be created. The maximum length should not be more than 75 characters.
Boot URI
Use this feature to input the URI address for HTTP Boot feature. The maximum length should
not be more than 128 characters.