Supermicro X13SCL-IF - Page 95

Chapter 4: UEFI BIOS
95
Commit Changes and Exit
Use this feature to save all changes and exit TLS settings.
Discard Changes and Exit
Use this feature to discard all changes and exit TLS settings.
Delete Certication
Use this feature to delete certication.
Intel(R) I210 Gigabit Network Connection - XX:XX:XX:XX:XX:XX
Intel(R) I210 Gigabit Network Connection - XX:XX:XX:XX:XX:XX
Firmware Image Properties
This feature displays information about the Ethernet controller. The following information
is displayed:
• Option ROM version
• Unique NVM/EEPROM ID
• NVM Version
NIC Conguration
Link Speed
Use this feature to specify the port speed for this port. The options are Auto Negotiated,
10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On Lan
Use this feature enable or disable Wake On Lan support. Wake On Lan allows the sys-
tem to wake up when an onboard LAN device receives an incoming signal. The options
are Disabled and Enabled.