Super X13SCL-IF User's Manual
96
Blink LEDs (range 0–15 seconds)
Use this feature to identify the physical network port by blinking the associated LED.
Highlight this feature and enter a number of seconds in the range of 0 to 15 to set the
amount of seconds to blink the LED. The default setting is 0.
The following information is displayed:
• UEFI Driver
• Adapter PBA
• Device Name
• Chip Type
• PCI Device ID
• PCI Address
• Link Status
• MAC Address
• Virtual MAC Address
Driver Health
This submenu displays the health of the LAN and its related controller.
To Next Page
Loading...
