Supermicro X7DCU - Front Control Panel

Chapter 2: Installation
2-9
X7DCU
12
19
20
Front Control Panel
JF1 contains header pins for various buttons and indicators that are normally lo-
cated on a control panel at the front of the chassis. These connectors are designed
specifi cally for use with Supermicro server chassis. See the fi gure below for the
descriptions of the various control panel buttons and LED indicators. Refer to the
following section for descriptions and pin defi nitions.
Front Control Panel Header (JF1) Pins
FP Power
B
OH/Fan Fail/
PWR Fail/UID LED
1
NIC1 LED
FP Reset B
u
2
HDD LED
Power LED
Reset
PWR
Vcc
UID Switch/Vcc
Vcc
Blue_LED_Cath
o
(UID)/Vcc
Ground
Ground
1920
Vcc
X
Ground
NMI
X
Vcc
PWR Fail LED
NIC2 LED