Appendix C: UEFI BIOS Recovery
C-3
Note: At this point, you may decide if you want to start with
BIOS Recovery. If you decide to proceed with BIOS Recovery,
follow the procedures below.
5. To continue with BIOS Recovery, select the item- "Proceed with
ash update." You will see the progress of BIOS Recovery as shown
on the screens below.
4. After locating the new BIOS binary image, the system will enter the
BIOS Recovery menu as shown below.
6. After the BIOS Recovery process is complete, click OK to reboot the
system.
Note: Do not interrupt the BIOS programming until it is com-
pleted.
To Next Page
Loading...
Need help?
General
