EasyManuals Logo

Supero C7B250-CB-MK User Manual

Supero C7B250-CB-MK
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #92 background imageLoading...
Page #92 background image
4-26
Supermicro C7B250-CB-MK Motherboard User’s Manual
The remaining options in the section are similar across Serial ATA
Ports 0 through 5.
Serial ATA Port
This item displays the detected SATA drive, if any.
Hot Plug
This feature designates the port specied for hot plugging. Set this item
to Enabled for hot-plugging support, which will allow the user to replace
a SATA disk drive without shutting down the system. The options are
Enabled and Disabled.
Congured as eSATA
This item displays the eSATA status for the detected hard drive.
Spin Up Device
When this option is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The settings are Enabled and Disabled.
SATA Device Type
Use this feature to identify the type of HDD that is connected to the SATA
port. The options are Hard Disk Drive and Solid State Drive.
PCH FW Configuration

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supero C7B250-CB-MK and is the answer not in the manual?

Supero C7B250-CB-MK Specifications

General IconGeneral
BrandSupero
ModelC7B250-CB-MK
CategoryMotherboard
LanguageEnglish

Related product manuals