4-22
Supermicro C7B250-CB-MK Motherboard User’s Manual
Graphics Turbo IMON Current
Use this feature to set the limit on the current voltage regulator. Valid
range is 14-31. Default is 31.
Skip Scanning of External Gfx Card
Use this feature to scan for External Gfx Card on PEG and PCH PCIE Ports.
If this feature is enabled, the system will not scan for a new card. The
options are Disabled and Enabled.
Primary Display
Use this feature to select the graphics device to be used as the primary
display. Select from IGFX/PEG/PCI or select SG for switchable GFX. The
options are Auto, IGFX, PEG, PCIE and SG.
Select PCIE Card
Use this feature to select either Elk Creek 4, PEG Eval or Auto to use
on the platform.
External Gfx Card Primary Display Conguration
Primary PEG
This feature allows the user to select the primary PCI Express Graphics
(PEG) slot. The options are Auto, PEG11, and PEG12.
Primary PCIE
This feature allows the user to specify which graphics card to be
used as the primary graphics card. The options are Auto, PCIE1,
PCIE2, PCIE3, PCIE4, PCIE5, PCIE6, PCIE7, PCIE8, PCIE9, PCIE10,
PCIE11, PCIE12, PCIE13, PCIE14, PCIE15, PCIE16, PCIE17, PCIE18,
and PCIE19.
Internal Graphics
This item keeps the Internal Graphics Device (IGD) enabled, based on
setup options. The options are Auto, Enabled, and Disabled.
GTT Size
Use this feature to set the memory size to be used by the graphics
translation table (GTT). The options are 2MB, 4MB, and 8MB.
Aperture Size
Use this feature to set the Aperture size, which is the size of system
memory reserved by the BIOS for graphics device use. The options are
128MB, 256MB, 512MB, 1024MB, and 2048MB.
To Next Page
Loading...
Need help?
General
