3-5
Chapter 3: Troubleshooting
Battery Removal
To remove the onboard battery, follow the steps below:
1. Power off your system and unplug your power cable.
2. Locate the onboard battery as shown below.
3. Using a tool such as a pen or a small screwdriver, push the battery
lock outwards to unlock it. Once unlocked, the battery will pop out
from the holder.
4. Remove the battery.
Question: I think my BIOS is corrupted. How can I recover my BIOS?
Answer: Please see Appendix C - BIOS Recovery for detailed instructions.
3-4 Battery Removal and Installation
Battery
Lock
Battery
Proper Battery Disposal
Attention! Please handle used batteries carefully. Do not damage
the battery in any way; a damaged battery may release hazardous
materials into the environment. Do not discard a used battery in the
garbage or a public landll. Please comply with the regulations set
up by your local hazardous waste management agency to dispose of
your used battery properly.
To Next Page
Loading...
Need help?
General
