Need help?Do you have a question about the Supero C7H61 and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Socket Type | LGA 1155 |
| Chipset | Intel H61 |
| Memory Type | DDR3 |
| Memory Slots | 2 x DIMM |
| Max Memory Supported | 16GB |
| Expansion Slots | 1 x PCIe 3.0 x16, 1 x PCIe 2.0 x1 |
| Storage Interface | 4 x SATA 3Gb/s |
| Audio | Realtek ALC662 6-Channel HD Audio |
| LAN | Realtek RTL8111E Gigabit LAN |
| Video Outputs | VGA |
| USB Ports | 4 x USB 2.0 (rear), 2 x USB 2.0 (internal) |
Details about the C7H61 motherboard and its capabilities.
Outlines the structure and content of the user manual chapters.
Explains symbols and conventions used for warnings and important information.
Provides a general introduction to the motherboard and its included components.
Illustrates the physical layout and component placement on the motherboard.
Presents a high-level block diagram of the motherboard's architecture and connections.
Details the features of the Intel H61 Express Chipset used on the motherboard.
Describes special functionalities like AC Power Loss recovery and PC Health Monitoring.
Explains the system's monitoring capabilities for voltages, temperatures, and fan speeds.
Details Advanced Configuration and Power Interface features for power management.
Discusses power supply requirements and connectors for the motherboard.
Describes the Super I/O chip and its serial port functionalities.
Lists the key hardware specifications and capabilities of the C7H61 motherboard.
Provides precautions and guidelines for handling static-sensitive components.
Guides users through the correct procedure for installing the CPU and heatsink.
Details the process of installing DDR3 memory modules into the motherboard slots.
Explains how to physically install the motherboard into a computer chassis.
Identifies and describes the various connectors and I/O ports on the motherboard's backplane.
Explains the pin definitions and connection options for PS/2 keyboard and mouse.
Details USB port types, pin definitions, and front panel headers.
Describes the dual Gigabit Ethernet ports and their LED indicators.
Explains the HD Audio codec and its output connections.
Covers the HDMI, VGA, DisplayPort, and COM1 serial ports.
Details the header for front chassis buttons and LEDs like Power and HDD.
Details pin-out definitions for various onboard connectors and headers.
Explains how to use jumpers to configure motherboard settings.
Explains the LAN and Power LEDs on the motherboard.
Details the SATA ports and their pin definitions for connecting storage devices.
Provides step-by-step procedures to diagnose and resolve common system issues.
Guidelines for contacting technical support for further assistance.
Answers to common questions regarding motherboard support and BIOS updates.
Instructions for safely removing and installing the CMOS battery.
Information on warranty service and the RMA process.
Overview of the AMI BIOS Setup Utility and its navigation.
Describes the primary screen of the BIOS Setup Utility and displayed system information.
Details various advanced system settings and configurations available in the BIOS.
BIOS settings related to system boot behavior and options.
Configuration options for the CPU, clock speeds, and performance tuning.
Settings related to the motherboard's chipset and its functionalities.
BIOS settings for configuring SATA drive modes and controllers.
Settings for PCI Express, PCI slots, and Plug and Play configuration.
Configuration options for serial, parallel, and other Super IO devices.
Settings for monitoring and controlling system fan speeds and temperatures.
Advanced Configuration and Power Interface settings for power management.
Options for setting administrator and user passwords, and boot sector virus protection.
Options for configuring the system's boot order and startup behavior.
Options for saving, discarding, or restoring BIOS settings before exiting.
Lists beep codes and their corresponding error messages for system diagnostics.
Instructions for installing system drivers from the included CD.
Guide to installing and configuring the SuperDoctor III system monitoring tool.
Introduction to the Unified Extensible Firmware Interface (UEFI) BIOS.
Steps to recover the main BIOS image if it becomes corrupted.
Procedure for recovering the BIOS using a USB device.
To Next Page
