4-10
C7H61 User’s Manual
Memory Remap
This feature enables or disables the memory above 4GB. The options are En-
abled and Disabled.
South Bridge Conguration
This item displays the current South Bridge conguration.
GbE Controller
Select Enabled to enable the onboard gigabit Ethernet controller. The settings
are Enabled and Disabled.
Load Onboard LAN2
This feature enables or disables the onboard ROM option for LAN2. The options
are Disabled and Enabled.
Wake on LAN from S5
Select Enabled to enable the capabiltiy to 'wake-up' the system from the S5
power state (Soft Off State) through the Ethernet controller. The settings are
Enabled and Disabled.
USB Functions
This feature will enable or disable the motherboard's USB functions. The op-
tions are Enabled and Disabled. If enabled, the following options are available:
Legacy USB Support
This feature enables support for legacy USB devices. Select Auto to disable
legacy support if USB devices are not present. Select Disable to have USB
devices available only for EFI applications. The options are Enabled, Disabled
and Auto.
Port 60/64 Emulation
This feature enables or disables I/O port 60h/64h emulation support. This should
be enabled for complete USB keyboard legacy support for non-USB-aware Op-
erating Systems. The options are Disabled and Enabled.
BIOS EHCI Hand-Off
This item is for Operating Systems that does not support Enhanced Host Con-
troller Interface (EHCI) hand-off. When enabled, EHCI ownership change will be
claimed by the EHCI driver. The settings are Enabled and Disabled.
To Next Page
Loading...
Need help?
General
