Supero C7H61 - Super IO Configuration

4-14
C7H61 User’s Manual
PCIe Slot 6 & 7 Option ROM
Use this feature to enable or disable PCIe slot Option ROMs. The options are
Disabled and Enabled.
Load Onboard LAN1/LAN2 Option ROM
This feature enables or disables the onboard ROM option for LAN1 and LAN2. The
options are Disabled and Enabled.

Super IO Conguration
Nuvoton LPC I/O - NCT6776F
Serial Port 1 / Serial Port 2
Select Enabled to enable the onboard serial port. The options are Enabled
and Disabled.
Serial Port 1 Settings
This option species the base I/O port address and the Interrupt Request
address of Serial Port 1. Select Auto to let the BIOS automatically assign the
base I/O and IRQ address.
The options for Serial Ports 1 and 2 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, 4, 10, 11), (IO=2F8h; IRQ=3, 4, 10, 11), (IO=3E8h; IRQ=3, 4, 10, 11)
and (IO=2E8h; IRQ=3, 4, 10, 11).
Serial Port 2 Settings
This option species the base I/O port address and the Interrupt Request
address of Serial Port 2. Select Auto to let the BIOS automatically assign the
base I/O and IRQ address.
The options for Serial Ports 1 and 2 are Auto, (IO=2F8h; IRQ=3), (IO=3F8h;
IRQ=3, 4, 10, 11), (IO=2F8h; IRQ=3, 4, 10, 11), (IO=3E8h; IRQ=3, 4, 10, 11)
and (IO=2E8h; IRQ=3, 4, 10, 11).
PS2 KB/MS Wake up
This feature is used to awaken the system from Standby mode by a PS/2
mouse or PS/2 keyboard. This must be enabled in the system level and
Operating System (O/S) as well, if supported).
S1 (OS Control) - Enables system wake up from S1 (default).
S5 (OS Control) - Enables system wake up from S1/S3/S4/S5.
Force Enable - Wake up support is always enabled regardless whether
it is disabled in the O/S.