Supero C7H61 - Nuvoton LPC I;O - NCT6106 D; Serial Port 3; Serial Port 3, Settings; Serial Port 3;Port 4 Mode

Chapter 4: AMI BIOS
4-15
Force Disable - Wake up support is always disabled regardless whether
it is enabled in the O/S.
Nuvoton LPC I/O - NCT6106D
Serial Port 3
Select Enabled to enable the onboard serial port. The options are Enabled
and Disabled.
Serial Port 3, Settings
This option species the base I/O port address and the Interrupt Request
address of Serial Port 3. Select Auto to let the BIOS automatically assign the
base I/O and IRQ address.
The options for Serial Port 3 are Auto, (IO=240h; IRQ=11), (IO=240h;
IRQ=10, 11, 12), (IO=248h; IRQ=10, 11, 12), (IO=250h; IRQ=10, 11, 12)
and (IO=258h; IRQ=10, 11, 12), (IO=260h; IRQ=10, 11, 12), (IO=268h;
IRQ=10, 11, 12).
Serial Port 3/Port 4 Mode
Use this feature to change the serial port mode for serial ports 3 and 4 simul-
taneously. The options are RS232 Mode, RS485 Mode, and RS422 Mode.
Serial Port 4
Select Enabled to enable the onboard serial port. The options are Enabled
and Disabled.
Serial Port 4, Settings
This option species the base I/O port address and the Interrupt Request
address of Serial Port 4. Select Auto to let the BIOS automatically assign the
base I/O and IRQ address.
The options for Serial Port 4 are Auto, (IO=248h; IRQ=11), (IO=240h;
IRQ=10, 11, 12), (IO=248h; IRQ=10, 11, 12), (IO=250h; IRQ=10, 11, 12)
and (IO=258h; IRQ=10, 11, 12), (IO=260h; IRQ=10, 11, 12), (IO=268h;
IRQ=10, 11, 12).
Serial Port 3/Port 4 Mode
Use this feature to change the serial port mode for serial ports 3 and 4 simul-
taneously. The options are RS232 Mode, RS485 Mode, and RS422 Mode.