Chapter 4: AMI BIOS
4-9
System Agent Conguration
This item displays the current North Bridge Revision.
VT-d
Select Enabled to enable Intel's Virtualization Technology support for Direct I/O
VT-d by reporting the I/O device assignments to VMM through the DMAR ACPI
Tables. This feature offers fully-protected I/O resource-sharing across the Intel
platforms, providing the user with greater reliability, security and availability in
networking and data-sharing. The settings are Enabled and Disabled.
PCI Express Port
This feature can force to enable or disable the onboard PCI Express port. The
options are Disabled, Enabled and Auto.
PEG Force Gen1
This feature forces Gen1 support on the PCI Express Graphics (PEG) port. The
options are Disabled, and Enabled.
Detect Non-Compliant Device
This feature enables or disables the detection of a non-compliant device that is
attached to the PCI Express Graphics (PEG) port. The options are Disabled,
and Enabled.
Initiate Graphic Adapter
This feature selects which graphics controller to use as a boot device. The op-
tions are IGD, PCI/IGD, PCI/PEG, PEG/IGD and PEG/PCI.
Note: IGD = Integrated Graphics Device.
IGD Memory
This feature selects the amount of memory for the Integrated Graphics Device
(IGD). The options are Disabled, 32M, 64M and 128M.
Render Standby
This feature enables or disables render standly by the Internal Graphics Device
(IGD). The options are Disabled and Enabled.
IGD Multi-Monitor
This feature enables or disables multi-monitor support by the Internal Graphics
Device (IGD). The options are Disabled and Enabled.
To Next Page
Loading...
Need help?
General
