4-20
Supermicro C7B250-CB-MK Motherboard User’s Manual
Max Link Speed
Select Auto, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
PEG0 Slot Power Limit Value
This item sets the upper limit of the power supplied by the slot (in
Watts). It is calculated by multiplying this value by the Slot Power
Limit Scale. Valid range is from 0-255.
PEG0 Slot Power Limit Scale
This item sets the scale of the Slot Power Limit Value (above). The
options are 1.0x, 0.1x, 0.01x, and 0.001x.
PEG0 Physical Slot Number
This item sets the physical slot number attached to this port. The
number has be globally unique within the chassis. Valid range is from
0-8191.
PEG 0:1:1
Enable Root Port
Select Enable to activate the Root Port. The options are Disabled,
Enabled, and Auto.
Max Link Speed
Select Auto, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
PEG1 Slot Power Limit Value
This option sets the upper limit of the power supplied by the slot (in
Watts). It is calculated by multiplying this value by the Slot Power
Limit Scale. Valid range is from 0-255.
PEG1 Slot Power Limit Scale
This option sets the scale of the Slot Power Limit Value (above). The
options are 1.0x, 0.1x, 0.01x, and 0.001x.
PEG1 Physical Slot Number
This option sets the physical slot number attached to this port. The
number has be globally unique within the chassis. Valid range is from
0-8191.
To Next Page
Loading...
