Supero C9X299-PG - Power Button; Reset Button

2-22
Supermicro C9X299-PG/-PGF/-RPGF Motherboard User’s Manual
Power Button
The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off
the system. This button can also be con-
gured to function as a suspend button
(with a setting in the BIOS - see Chapter
4). To turn off the power in the suspend
mode, press the button for at least 4
seconds. Refer to the table on the right
for pin denitions.
Power Button
Pin Denitions (JF1)
Pin# Denition
1 Signal
2 Ground
Reset Button
The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to a
hardware reset switch on the computer
case to reset the system. Refer to the
table on the right for pin denitions.
Reset Button
Pin Denitions (JF1)
Pin# Denition
3 Reset
4 Ground
Power Button
1
NIC1 LED
Reset Button
2
HDD LED
Power LED
#3-4
Ground
Ground
1920
NIC2 LED
X
NMI
Ground
OH/Fan Fail LED
Vcc
X
Power Fail LED
Vcc
Vcc
Vcc
Vcc
#1-2
Vcc
A. Power Button
B. Reset Button
B
A