4-4
X9DRL-3F/X9DRL-iF User’s Manual
Quiet Boot
Set this value to allow the bootup screen options to be modied between POST
messages or the OEM logo. Select Disabled to allow the computer system to display
the POST messages. Select Enabled to allow the computer system to display the
OEM logo. The default setting is Enabled.
AddOn ROM Display Mode
This sets the display mode for the Option ROM. Select Keep Current to use the cur-
rent AddOn ROM Display setting. Select Force BIOS to use the Option ROM display
mode set by the system BIOS. The options are Force BIOS and Keep Current.
Bootup Num-Lock
Use this feature to set the Power-on state for the Numlock key. The options are
Off and On.
Wait For 'F1' If Error
Select Enabled force the system to wait until the 'F1' key is pressed when an error
occurs. The options are Disabled and Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt
19 at boot and allow the drives that are attached to these host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are Enabled and Disabled.
PowerConguration
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
If this feature is set to Instant Off, the system will power off immediately as soon
as the user presses the power button. Select 4 Second Override for the system
to power off when the user presses the power button for 4 seconds or longer. The
options are Instant Off and 4 Seconds Override.
Restore on AC Power Loss
To Next Page
Loading...
Need help?
General
