Chapter 4: AMI BIOS
4-17
Device Settings
This feature indicates whether or not a reset is required for a serial port specied.
Change Settings
Use this feature to set the optimal Environment Control Interface (PECI) setting
for a serial port specied. The default setting is Auto, which will allow the AMI
BIOS to automatically select the best setting for the PECI platform.
Device Mode
Use this feature to select the desired mode for a serial port specied. The options
are Normal and High Speed.
Serial Port Console Redirection
These submenus allow the user to congure the following Console Redirection
settings for a COM Port 1 or COM Port 2 as specied by the user.
COM 1/COM 2
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled.
Console Redirection Settings
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII character set. Select VT100+
to add color and function key support. Select ANSI to use the extended ASCII
character set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are VT100, VT100+, VT-UTF8, and ANSI.
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirec-
tion. Make sure that the same speed is used in the host computer and the client
computer. A lower transmission speed may be required for long and busy lines.
The options are 9600, 19200, 38400, 57600, and 115200 (bits per second).
To Next Page
Loading...
Need help?
General
