SP91 User Manual
· Macro definition won ’ t be cleared.
ESC
ESC
ESC
ESC a
a
a
a n
n
n
n
[ Name ] Select alignment mode
[ Format ] ASCII ESC a n
Hex 1B 61 n
Decimal 27 97 n
[ Range ] 0 £ n £ 2, 48 £ n £ 50
[ Description ] Put one line date alignment as the point position
Select alignment type by n
n Alignment
0, 48 Left alignment
1, 49 Middle
2, 50 Right alignment
[ Notes ] · At the standard mode, only at the beginning of the line deal with, this command will effect.
Input this command in page mode, the printer only execute interior sign operation.
This command is not effect for page mode.
This command executed alignment in print area.
This command align blanket area by HT
HT
HT
HT , ESC
ESC
ESC
ESC $
$
$
$ or ESC
ESC
ESC
ESC \
\
\
\ .
[ Default ] n = 0
[ For example ]
Left
Left
Left
Left alignment
alignment
alignment
alignment Middle
Middle
Middle
Middle Right
Right
Right
Right alignment
alignment
alignment
alignment
ESC
ESC
ESC
ESC D
D
D
D n1
n1
n1
n1 .
.
.
. .
.
.
. .
.
.
. nk
nk
nk
nk NUL
NUL
NUL
NUL
[Name] Set horizontal tab positions
[Format] ASCII ESC D n1 . . . nk NUL
Hex 1B 44 n1 . . . nk 00
Decimal 27 68 n1 . . . nk 0
[Range] 1 ≤ n ≤ 255
0 ≤ k ≤ 32
[Description] Set horizontal tab positions.
· n specifies the number from the beginning of one line, uses to set horizontal
position.
· k indicates the total data which set by horizontal position.
[Notes] · Horizontal position as a data to store, this data is [character width ´ n], is
measuring from the beginning of the line. The character width includes the right spacing
of the character, and double width character set by double width of stable character.
· This command delects the horizontal position which set before.
· When set n = 8, the print position moved to the ninth row by sending HT.
· Could be set position to 32 (k = 32). The data overs 32 will be dealt as normal data.
To Next Page
Loading...