SP91 User Manual
(82.5 mm paper width type ) 640 dot nL = 128, nH = 2
(79.5 mm paper width type ) 576 dot nL = 64, nH = 2
(60 mm paper width type ) 448 dot nL = 192, nH = 1
(58 mm paper width type ) 432 dot nL = 176, nH = 1
[Reference] GS
GS
GS
GS L
L
L
L
GS
GS
GS
GS ^
^
^
^ r
r
r
r t
t
t
t m
m
m
m
[Name] Execute macro
[Format] ASCII GS ^ r t m
Hex 1D 5E r t m
Decimal 29 94 r t m
[Range] 0 ≤ r ≤ 255
0 ≤ t ≤ 255
m = 0, 1
[Description] Execute macro
· r specifies times of executing macro.
· t specifies the waiting time of operating macro.
· m specifies the macro executed mode.
When the LSB of m is 0:
Macro continues to execute r times at the specified time spacing.
When the LSB of m is 1:
After the waiting time which specifies by t, PAPER OUT LED will be flashed, and the
printer be waited, FEED button will be pushed. After pushing the button, the printer
executes macro one time. The printer operates r times repeatly.
[Notes] · Executes macro one time, the waiting time is t × 100ms.
·
If
receive this command when defining one macro, so the macro definition will be
failed and the definition will be cleared.
·
If
do not define macro or r is 0, do not execute any operation.
· When operating macro(m=1), feed paper can ’ t be taken by FEED button.
[Reference] GS
GS
GS
GS :
:
:
:
GS
GS
GS
GS f
f
f
f n
n
n
n
[Name] Select font for HRI （ Human Readable Interpretation ） characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Description]
When printing the bar code, selects one font of HRI characters.
n specifies one character font as following table:
N Character Font
0, 48 Font A (12 ´ 24)
1, 49 Font B (9 ´ 17)
[Notes] · HRI Human Readable Interpretation.
· Print HRI characters to specified position by GS H.
[Default] n = 0
To Next Page
Loading...