SurePrint SP91 - Page 66

SP91 User Manual
FS
FS
FS
FS &
&
&
&
[Name] Set Chinese character mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Select Chinese character mode.
[Particularize] · This command only affects when selecting GB18030 code system.
· GB18030 only supports double bytes 1 、 2 、 3 、 4 、 5 area.
· Select Chinese character mode, the printer processes all Chinese character code,
two bytes each time.
· Process Chinese character code as the sequence of the first byte, the second
byte.
· Turn the power on, the printer enter into Chinese character mode automatically.
· Select Chinese character mode, firstly the printer detects whether the code is
Chinese character or not; If it is the Chinese character and processes the first byte and
the second byte.
[Reference] FS
FS
FS
FS .
.
.
. ， FS
FS
FS
FS C
C
C
C
FS
FS
FS
FS .
.
.
.
[Name] Cancel Chinese mode
[Format] ASCII FS .
Hex 1C 2E
Decimal 28 46
[Description] Cancel Chinese mode
[Particularize] · This command only affects when selecting GB18030 code system.
· When Chinese character mode doesn ’ t be selected, all character codes are ASCII code,
process one character each time.
· Turn the power on, the printer enters into Chinese character mode automatically.
Reference] FS
FS
FS
FS &
&
&
& , FS
FS
FS
FS C
C
C
C
FS
FS
FS
FS W
W
W
W n
n
n
n
[Name] Turn quadruple-size mode on/off for Chinese characters
[Format] ASCII FS W n
Hex 1C 57 n
Decimal 28 87 n
[Range] 0 ≤ n ≤ 255
[Description] Turn quadruple-size mode on/off for Chinese characters.
· When the LSB is 0, turn quadruple-size mode off for Chinese characters
· When the LSB is 1, turn quadruple-size mode on for Chinese character.
[Particularize] · Only LSB of n is effective.
· In quadruple-size mode, the print character size is the same as the print character
size which be set double width and double height .
· Turn quadruple-size mode off by this command, the following character size printed as
normal size.
· Different character height in one line, all characters in this line will be adjusted on base
line.