6
1.0 Prior to use
1.1 Charging
It is important that the battery has been charged before use.
Using the USB cord provided, plug the USB connection
into the charging port on the back of the unit [under rubber
cover]. Now plug the other end into the wall adaptor. You can
now plug the wall adaptor into a power outlet to begin charg-
ing. Full charging will take at least 4 hours.
1.2 Registering
It is recommended that you register your Micro 700X for
warranty purposes. Follow the easy instructions at
www.sureshotgps.com/register. Upgrades to soware will
only be possible if you have registered.
To Next Page
Loading...
