31
The Planning mode also accounts for the following
information from previous dives:
any calculated residual nitrogen
all dive history for the past four days
oxygen exposure (EAN mode)
The no-decompression times given for different depths
will therefore be shorter than before your first "fresh"
dive.
DIVE NUMBERING SHOWN DURING
DIVE PLANNING
Dives belong to the same repetitive dive series if the
instrument was still counting down the no-fly time at
the beginning of the dive.
The surface interval must be at least 5 minutes for a
dive to be considered a repetitive dive. Otherwise, it is
considered a continuation of the same dive. The dive
number will not change and the dive time will continue
where it left off (see chapter 3.2.3.3.).
Fig. 3.8. Dive Planning. The
Planning mode is indicated by
the PLAN text and mode
indicators.
Fig. 3.9. Planning. The no-
decompression time limit at 30.0
m [100 ft] is 18 minutes in P0/
A0 mode.
To Next Page
Loading...
