63
3.3.5. SURFACE INTERVAL AFTER A
FREE/GAUGE DIVE
An ascent to any depth shallower than 1.2 m [4 ft] will
cause the DIVING display to be replaced by the
SURFACE display, giving the following information
(Fig. 3.32. and 3.34.):
maximum depth of most recent dive in meters
[ft]
present depth in meters [ft]
the surface time in hours and minutes
(separated by a colon), telling the duration of
the present surface interval.
AFTER A FREEDIVE:
dive time of most recent dive in minutes and
seconds in the center window (Fig. 3.33.).
m
Fig. 3.35. Alternating display
after Gauge dive. Center window
showing the no-flying time.
Fig. 3.34. Surface display after
Gauge dive. Center window
showing surface time.
To Next Page
Loading...
