49
3.2.3. AT THE SURFACE
3.2.3.1. SURFACE INTERVAL AFTER AN AIR/EAN DIVE
An ascent to any depth shallower than 1.2 m [4 ft] will cause the DIVING display to
be replaced by the alternating SURFACE displays, giving the following information
(Fig. 3.24. and 3.25.):
maximum depth of most recent dive in meters [ft]
present depth in meters [ft]
the surface time in hours and minutes (separated by a colon), telling the
duration of the present surface interval
the desaturation/no-flying time in hours and minutes is shown next to the
airplane in the center window of the display
no-flying warning indicated by an airplane icon
Altitude Adjustment setting
Personal Adjustment setting
Diver Attention symbol indicates if you should prolong your surface interval
time
STOP label for 5 min, if the Mandatory Safety Stop was violated
ASC TIME, if the decompression ceiling was violated (= Error Mode)
(Fig. 3.26.)
To Next Page
Loading...
