Suunto Stinger - EAN Mode Display Customization

46
3.2.2.2. PRESETTING THE DISPLAYS IN
THE EAN MODE
When entering the EAN mode the oxygen percentage
and partial pressure are always the default displays in
the lower part of the display.
Preset with the - button in the lower left corner of the
display (Fig. 3.22.):
 oxygen percentage (default)
 the maximum depth or
 the temperature.
Preset with the + button in the lower right corner of the
display (Fig. 3.22.):
 current oxygen partial pressure
 the dive time or
 the current time.
MAX
Fig. 3.21. Nitrox display.
Maximum depth based on set
O
2
% (21%) and PO
2
(1.4 bar) is
54.1 m [177 ft].
Fig. 3.22. Diving in EAN mode.
The O
2
% is set to 32%.