33
During a no-decompression stop dive, the following information will be displayed
(Fig. 3.11.):
your present depth in meters [ft]
the Altitude Adjustment setting on the right side of the center window with
a wave and mountain symbols (A0, A1, or A2) (see Table 3.3.)
the Personal Adjustment setting on the right side of the center window with
a diver symbol and + signs (P0, P1, or P2) (see Table 3.4.)
the available no-decompression time in minutes in the center window as
NO DEC TIME. It is calculated based on the five factors described in
chapter 7.1. "Operating Principles".
the maximum depth during this dive in meters [ft], indicated as MAX or
the temperature in °C [°F] in the lower left corner.
the elapsed dive time in minutes, indicated as DIVE TIME or the current
time, indicated as TIME in the lower right corner.
To Next Page
Loading...
