59
NOTE: The number of hours of dive time available
depends on the sampling rate. A computer set to record
depth every 4 seconds will fill its memory sooner than
the same computer set to 30 seconds. The number of
available hours also depends on the length of each dive.
Fewer longer dives means more total hours of dive time
available in the memory than does a large number of
short dives.
NOTE: The dive time shown on the Logbook/Profile
memory is always shorter or equal to the dive time
shown in the surface display depending on the sampling
rate.
If set to Free/Gauge mode the text FREE is shown after
activation (Fig. 3.27.)
Fig. 3.27. Free/Gauge Mode.
To Next Page
Loading...
