Suunto Stinger - Page 89

87
The data transfer is carried out using the water contact of the Stinger. The following
data is transferred to the PC:
 depth profile of the dive
 dive time
 preceding surface interval time
 dive number
 Altitude and Personal adjustment settings
 oxygen percentage setting and maximum OLF (in EAN mode)
 tissue calculation data
 temperature at the beginning of the dive, maximum depth and end of the
dive
 dive entry time (year, month, day and time)
 additional dive information (e.g. SLOW and Mandatory Safety Stop
violations, Diver Attention Symbol, Bookmarks, Surfaced Mark,
Decompression Stop Mark, Ceiling Error Mark)
 dive computer serial number
 personal 30 character information.
It is also possible to manually add comments and other personal information to the
PC based dive data files. The SUUNTO PC-Interface package comes complete with
the interface unit, the software and an installation guide.