To Next PageTo Next PageWhy won't the shift operation activate on my Suzuki Outboard Motor?
If the shift operation will not be activated on your Suzuki Outboard Motor, the electronic shift control system may have failed.
General| Starting System | Electric |
|---|---|
| Cooling System | Water Cooled |
| Steering System | Remote |
| Full Throttle Operating Range | 5000-6000 RPM |
| Engine Mounting | Shear Mount |
| Trim Method | Power Trim and Tilt |
| Displacement | 2044 cm3 (124.7 cu.in.) |
| Maximum Output | 115 HP |
| Oil Pan Capacity | 5.5 L (5.8 US qt) |
| Ignition System | Fully transistorized |
| Alternator Output | 12V 40A |
| Shaft Length | 20 in (508 mm) |
| Engine Type | 4-Stroke DOHC 16-Valve |
| Fuel System | Multi-point sequential electronic fuel injection |
| Exhaust | Through Prop Hub Exhaust |
| Fuel Tank | Remote Fuel Tank |
Crucial safety and operational guidance for owners regarding outboard motor use.
Guidelines for using unleaded and ethanol-blended gasoline with the outboard motor.
Recommendations for gear oil type and viscosity grades for the outboard motor.
Explanation of symbols found on outboard motor and fuel tank labels for safety.
Specifications for suitable starting batteries for outboard motors.
Information about the keyless fob, its function, and associated warnings.
Explanation of the immobilizer system's function with the keyless fob.
Guidance on choosing the correct propeller for optimal boat performance.
Step-by-step instructions for safely installing a boat propeller.
How to adjust trim angle for steering stability and performance.
Explanation of the automatic trim angle adjustment function.
Adjusting trim tabs to compensate for boat veering tendencies.
Adjusting control handle friction and detent force for operator preference.
Information on factory-set idle speed adjustment.
Procedure to cancel the current tilt upper limit setting.
Steps to reset and set the tilt upper limit position for the motor.
Overview of the multi-function gauge buttons and their operations.
How to select different display screens on the multi-function gauge.
Guide to selecting and displaying sub-information on the gauge.
Navigating the menu for settings like illumination, diagnosis, and display.
Alerts for conditions that may damage the outboard motor.
Warning for exceeding the engine's maximum recommended speed.
Alert for low engine lubricating oil pressure.
Warning for high cylinder wall temperature due to insufficient cooling.
Alert for thermostat failure or improper engine temperature rise.
Warning for low battery voltage affecting motor performance.
Error alert for the electronic throttle and shift control system.
Alert for errors in the 2nd station control system.
Warning for errors in the electronic throttle control system.
Alert for errors in the electronic shift control system.
Alert for communication errors within the gauge system.
Warning when TROLL mode operation is unavailable or starts incorrectly.
Alert for keyless fob identification errors or system malfunctions.
Warning for low keyless fob battery voltage impacting performance.
Alert for low battery voltage affecting the keyless control unit.
Operating the power trim and tilt switch for motor angle adjustment.
Manually tilting the motor when power trim is unavailable.
Using the tilt lock lever to secure the motor in a tilted position.
Guidelines for the initial engine break-in period to ensure longevity.
Using the engine switch for starting and stopping engines.
Using the ignition key for starting and stopping engines.
Overview of control panel functions for multiple engine configurations.
Details on remote control box types and their switches.
Pre-start checks and procedures for the outboard motor.
Step-by-step guide to starting the outboard motor.
Procedures for shifting gears and controlling boat speed.
Instructions for safely stopping the outboard motor.
Recommended procedure for removing the outboard motor from a boat.
Guidelines for safely transporting the outboard motor vertically or horizontally.
Schedule for regular inspections and maintenance tasks based on hours or months.
Procedures for removing, inspecting, and installing spark plugs.
Inspecting breather and fuel lines for leaks or damage.
Step-by-step guide for changing the engine oil.
Inspection and maintenance of anodes for corrosion protection.
Checking bonding wires for electrical connections and damage.
Flushing water passages with engine running in vertical position.
Flushing water passages with engine not running in vertical or tilt-up.
Procedures for preparing the motor for long-term storage.
Guidelines for storing the battery during extended periods of non-use.
Information on sound pressure level regulations and limits for European countries.
