PERIODIC MAINTENANCE 2-13
OCV (Oil control valve)
• On the DF250 model, install gasket and OCV, and then
tighten bolts securely.
NOTE:
Position the projection of OCV gasket as shown the right.
#
" OCV bolt: 12 N·m (1.2 kg-m, 8.6 lb-ft)
Collector assembly
• Install the collector assembly. (See page 6-5, 6-7.)
Checking
• All parts removed have been returned to their original posi-
tions.
• Check hose and wire routing. (See page - .)
• Check oil leakage.
Do not re-use OCV gasket. Always replace with new
one.
1. OCV gasket
1
1
1. Collector assembly
To Next Page
Loading...
