• Install the wheel bearings
as
follows with
the
special tool.
CAUTION:
First install
the
wheel bearing for right side.
09941·34511: Bearing installer set
09924·84510: Bearing installer set
Bearing (Ll
DISC
NOTE:
< Left side
Right side
):>
Mount the disc plate with a marking
"R"
on the right side and
that with
"L"
on the
left
side.
SPEEDOMETER GEARBOX
• Before installing
the
speedometer gearbox, grease it.
• When installing
the
speedometer gearbox
to
the
wheel hub,
be sure
to
align
the
four cutaway portions
CD
on
the
wheel
hub with the four tabs
CID
of
the
speedometer gear.
• Before tightening
the
axle shaft, make sure
to
locate the
speedometer gear box properly with its stopper
tab
in
con·
tact
with the fork
leg
as
shown. Tighten
the
axle shaft
to
specification.
Clearance
< Left side
CHASSIS
7·6
Right
side>
To Next Page
Loading...
