Suzuki RGV250T 1996 - Actuator; Operation of Oil Pump

ACTUATOR
The oil pump pulley has been separated from the actuator
pulley.
OPERATION OF OIL PUMP
When the actuator pulley turns, the lug ® on the actuator
pulley to push the oil pump pulley groove @, and thus oil
pump is operated by the oil pump pulley when the exhaust
valve
is over half opening condition.
DISASSEMBL Y
• Remove the oil pump pulley by removing the boltCDwhile
holding the actuator
pulley with an adjuster wrench .
• Remove the oil
pump pulley CID, spring ® and actuator
pu lIey
@ from the actuator body.
RGV250N ('92·MODEL) 11·8