Suzuki RGV250T 1996 - Page 52

3·19 ENGINE
• After remounting the engine, route wiring harness, hoses
and cables properly by referring to the sections, wire routing
and cable routing, and adjust the following items
to the
specification.
Page
* Rear brake pedal .................... 2-12
* Brake light switch .................... 2-12
* Clutch cable ........................ 2- 8
* Throttle cables ...................... 2- 6
* Choke cables ....................... 2- 6
* Idling adjustment .................... 2- 5
* Filling cooling solution ................ 2- 8
* Exhaust valve operation ............... 6·11
* Oil pump control cable ................ 2- 7
* Bleeding air from oil pump ............. 4- 9