3-20
5. Measure the distance L2 from the seat bolt to the chain adjuster
lock-nut with the motorcycle off the stand and riding the motorcycle
normally in full riding gear.
6. Find the sag by subtracting L2 from L1.
 Standard sag range: 105 mm (4.1 in)
When the sag measured is: Adjustment procedure
Less than 105 mm (4.1 in) Reduce spring pre-set length by turning the spring adjuster nut.
More than 105 mm (4.1 in) Increase spring pre-set length by turning the spring adjuster nut.
To Next Page
Loading...
