6-24
Oil Strainer (No.2) Cleaning
16.Remove the bolt. Remove the
gearshift lever E.
17.Remove the bolts. Remove the
generator cover F.
18.Remove the bolts. Remove the
oil pump No.2 cover G.
Remove the snap ring H and
oil strainer No.2 I.
09930-06108:
Snap ring pliers (Close type)
19.Check the oil strainers for any
damage or clogging. If the oil
strainer is damaged, replace
the oil strainer. If the oil
strainer is clogging, clean the
oil strainer with a compressed
air.
To Next Page
Loading...
