Suzuki RM85 User Manual

12-6 COOLING SYSTEM
WATER PUMP REASSEMBLY
• Apply THREAD LOCK SUPER “1322” to the outer surface of
the oil seal. Install the oil seal with a proper tool.
 99000-32110: THREAD LOCK SUPER “1322”
• Apply grease to the machanical seal lip.
• Insert the water pump shaft.
• Install the bearing with the special tool.
 09916-44910: Valve guide driver
09916-53340: Valve guide installer
• Install the snap ring 1.
• Reassemble the clutch cover and water pump cover.
(7-5)
• Connect the radiator hose.
• Pour engine coolant and transmission oil. (2-7 and -8)

Suzuki RM85 Specifications

General

Engine Type	2-stroke, liquid-cooled, single cylinder
Displacement	84.7cc
Bore x Stroke	48.0 mm x 46.8 mm
Ignition	CDI
Transmission	6-speed constant mesh
Final Drive	Chain
Front Brakes	Single hydraulic disc
Rear Brakes	Single hydraulic disc
Compression Ratio	9.5:1
Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Swingarm type, coil spring, oil damped
Front Tire	70/100-17
Rear Tire	90/100-14
Overall Width	765 mm
Overall Height	1, 110 mm
Wheelbase	1, 240 mm (48.8 in.)
Curb Weight	73 kg (161 lbs.)
Fuel Tank Capacity	5.5 L