112 SV650K7/SK7/AK7/SAK7 (’07-MODEL)
Step 8
1) Connect the rear wheel speed sensor coupler.
2) Connect three 1.5 V dry cells
A in series as shown and make
sure that their total voltage is more than 4.5 V.
Measure the current between
+ dry cell terminal and
7 ter-
minal on the ABS control unit coupler.
$ Normal value: 5.9 – 16.8 mA
" 09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
. Tester knob indication: Current ((, 20 mA)
Is the current OK?
YES Replace the ABS control unit/HU.
NO Replace the rear wheel speed sensor.
DCmA
ABS control unit coupler (Harness end)
SAMPLE
To Next Page
Loading...
