136 SV650K7/SK7/AK7/SAK7 (’07-MODEL)
FRONT BRAKE HOSE ROUTING (For SV650A)
*1
*5
*7
*6
14˚
3
5
˚
42˚
4
2
˚
14˚
*3
*2
*9
*11
*11
*13
*12
*10
*4
*8
1 ABS control unit/HU *7
Pass through the throttle cables in front of the
brake hose.
2 Clamp *8
Pass through the brake pipes inside of the fuel
tank drain hose and breather hose.
*1 Pass through the brake hose
A under the
B. *9 Fix the pipes painted mark to the clamp.
*2
Pass through the brake hose
A upper the
B &
C.
*10
Set the protector of brake pipe to under the
holder guide.
*3
Set the rubber stepped part on the holder’s bot-
tom plate.
*11
Set the brake hose with stopper before tighten-
ing.
*4
Set the rubber stepped part on the groove of the
holder and screw it.
*12
Fit the clamp around the sleeve, insert the
clamp to hole of fender.
*5
Set the brake hose with stopper before tighten-
ing.
*13
Fix the brake hose painted green to the left and
bottom sides.
*6 Clamp the brake hose firmly.
SAMPLE