SV650K7/SK7/AK7/SAK7 (’07-MODEL) 137
FRONT BRAKE HOSE ROUTING (For SV650SA)
1 ABS control unit/HU *8 Clamp ends should face backward.
2 Clamp *9 Clamp ends should face forward.
*1
Pass through the brake hose
A under
the
B.
*10
Pass through the brake pipes inside of the fuel tank
drain hose and breather hose.
*2
Pass through the brake hose
A upper
the
B &
C.
*11 Fix the pipes painted mark to the clamp.
*3
Set the rubber stepped part on the
holder’s bottom plate.
*12
Set the protector of brake pipe to under the holder
guide.
*4
Set the rubber stepped part on the
groove of the holder and screw it.
*13 Clamp the brake hose firmly.
*5
Set the brake hose with stopper before
tightening.
*14
Fix the brake hose painted green to the left and bot-
tom sides.
*6 Clamp the brake hose firmly. *15
Fit the clamp around the sleeve insert the clamp to
hole of fender.
*7
Pass through the throttle cables behind
of reservoir hose.
*1
*8
*9
*7
*6
15˚
42˚
4
2
˚
14˚
*3
*2
*11
*5
*5
*14
*13
*15
*12
*4
*10
SAMPLE