SV650K7/SK7/AK7/SAK7 (’07-MODEL) 143
FRONT WHEEL SPEED SENSOR INSTALLATION (For SV650A)
*1
Pass the wheel speed sensor lead wire and
speed sensor lead wire in front of the brake
hose.
*7 Into headlight housing
*2
Clamp the sensor lead wire to brake hose with
speed sensor lead wire at yellow marking.
*8
Clamp brake hose to the head pipe and into the
frame.
*3 Cut excess tip. *9
Clamp the sensor lead wire to brake hose with
speed sensor lead wire at yellow marking.
*4
Set speed sensor lead wire between front fork
and clamp.
*10
Pass through the sensor lead wire and the speed
sensor lead wire to the guide, no contact with
sensor lead wires and frame.
*5
Clamp the sensor lead wire to brake hose at
sleeve.
*11 Letters should face outward.
*6
Clamp at front side of brake hose. Make clear-
ance with the front fender.
Clamp the sensor lead wire to brake hose.
*1, *2
*4
*6
*5
*7
*3
*8
*9
*10
*11
60 mm (2.4 in)
50 mm (2.0 in)
42
SAMPLE
To Next Page
Loading...
