Suzuki SV650A - Page 145

144 SV650K7/SK7/AK7/SAK7 (’07-MODEL)
FRONT WHEEL SPEED SENSOR INSTALLATION (For SV650SA)
*1
Clamp the sensor lead wire to wiring harness
with speed sensor lead wire at yellow marking.
*6
Clamp the sensor lead wire to brake hose at
sleeve.
*2
Pass the wheel speed sensor lead wire and
speed sensor lead wire in front of the brake
hose.
*7
Clamp at front side of brake hose. Make clear-
ance with the front fender.
Clamp the sensor lead wire to brake hose.
*3
Clamp the sensor lead wire to brake hose with
speed sensor lead wire at yellow marking.
*8 No contact with sensor lead wires and frame.
*4 Cut excess tip. *9 Letters should face outward.
*5
Set speed sensor lead wire between front fork
and clamp.
*1
*2, *3
*4
*5
*6
*7
*8
*9
4
0
m
m
(1
.6
in
)
6
0
m
m
(2
.4
in
)
42
42
14
SAMPLE