SVAT ELECTRONICS
now you can see
CLEARVU2 6
5. Connect the 60ft video/power
wire’s male RCA plug to the VIDEO
IN port for channels 1~4.
Wiring The Cameras
1. Plug the 4 PIN DIN female
connection on the camera into the
4 PIN DIN male connection on the
60 ft video/power wire.
2. Plug the camera’s power supply
into the power jack located on the
60 ft video/power wire.
3. Plug the camera’s power adapter
into an AC outlet.
4. Attach the BNC connectors to the
VIDEO IN ports and VIDEO OUT
port on the back of the DVR.
NOTE: For detailed instructions on camera features and functions, please refer to the CV67 camera guide included in
the package.
To Next Page
Loading...
