15
Configuration: Live View: View
On the “View” tab, you can change the display order of each camera connected.
1. Select an available viewing window on the right-hand side.
2. Double-click one of the available camera slots on the left-hand side that you would
like to place the viewing window that you selected.
3. Select the “Live View Mode” that you would like to change.
4. Press the “Play” button to start the live view of all cameras connected to the DVR.
Press the “Stop” button to stop the live view of all cameras connected to the DVR.
Please note, pressing the “Stop” button means you will not see a real-time image in
live view mode. Press the “Play” button to enable real-time view.
5. If your DVR has multiple cameras connected, you can click this to change the cam-
era slots available. The page numbers displayed will change depending on which live
view mode you have selected.
Don’t forget to click “Apply” to save settings.
2
1
3 4 5
To Next Page
Loading...
