23
HDD: General
The HDD function allows you to initialize the hard drive in the DVR. Initializing will
format the hard drive and erase any data that is on there. You also have the option of
adding a NAS (network attached storage) device that the DVR can record to.
Add: Create a folder on your NAS device to save to. Input the IP address of the NAS
device and the folder name you created. Click “OK” to continue.
Init: Enable the hard drive’s checkbox then click this to format the hard drive. A mes-
sage will appear noting that all data will be erased. Make sure you backup your hard
drive if required before formatting. Click “OK” to continue.
To Next Page
Loading...
