Swann hdr8-8050 - General: DST Settings; Daylight Saving Time; DST Application Period; DST Time Bias

6
Configuration: General: DST Settings
Enable DST (check-box): Enable this setting if you would like the DVR to adjust the
time when daylight savings time begins.
From/To: Here you can define when daylight savings applies to your location. There
are many different standards for DST which can vary dramatically even in the same
time zone, so you’ll need to tell the DVR when it applies to you.
DST Bias: This refers to the difference in minutes, between Coordinated Universal
Time (UTC) and the local time. Select the time that DST has increased by in your time
zone.
Don’t forget to click “Apply” to save settings.