26
Record: Schedule
By default, a motion detection schedule has been enabled for each connected camera.
You can however change the schedule according to what fits in with your needs. The
schedule is presented as a 24 hour 7 days a week grid. Yellow represents motion re-
cording and blue represents normal recording.
Camera: Select a camera that you would like to edit.
Enable Schedule: This is enabled by default.
Edit: Click this to edit the schedule. You can set a schedule for certain days and differ-
ent starting and ending times. You also have the choice of selecting normal or motion
detection recording. Use the “Copy” function to apply these settings to the other cam-
eras. Click the “Apply” button to confirm.
Don’t forget to click “Apply” to save settings.
To Next Page
Loading...
