22
Manual: Record
The manual record function allows you to override and default recording schedules in
place. The recording schedule for each camera connected can be changed. The green
“ON” button indicates that each camera has a recording schedule enabled. The red
“ON” button indicates that each camera has no recording schedule enabled and the
yellow “ON” button indicates that each camera is recording manually. Click the button
next to each camera to change the recording status.
Normal: The DVR will constantly record for any given period. You won’t miss anything
but constant recording will fill the hard drive very quickly.
Motion Detection: This is the recommended recording schedule and is enabled by de-
fault. The DVR will only record when motion is detected.
To Next Page
Loading...
